Home
Home Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
Go Back   VoIP Termination : VoIP Software | VoIP Hardware | VoIP Services : New VoIP Hardware
Welcome to the VoIP Termination.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
New VoIP Hardware Sell your new Telephony Hardware here. IP Phones, Routers, Switches, Gateways or any other VoIP Equipment.


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 04-18-2008, 11:26 PM
Member
 
Join Date: Dec 2007
Posts: 52
Send a message via MSN to andysip Send a message via Skype™ to andysip
Default 4 Ports VoIP Gateway

The SPE 4.2 pro Voice over IP Adapter (Gateway) is capable of delivering and ultra-affordability solution for commercial and residential application worldwide, and meets international branches, SOHO and personal needs. The SPE Gateway is a low cost, feature rich SIP device that supports router, VoIP, FoIP and remote software upgrading functionalities and can be installed seamlessly in any SIP based telephony system. It can be connected directly to phones, fax machines, key systems, PSTN lines or a PBX.

Features & Benefits

 Full Feature Voice / Fax-over-IP
 Ultra-compact and lightweight
 Universal plug and dial
 Extremely cost affordable

Technical Details
Model: SPE 4.2 pro
Ports: Power, 2 (RJ45) for Ethernet port and RJ11 for Phone ports
Phones Ports: 4 FXS ports and 2 FXO ports
Standards: SIP (RFC 3261~3266 and various SIP draft extensions), SDP (RFC2327), RTP/RTCP (RFC 3550, 3551)
Voice Codec: G.711 u-law, G.711 a-law, G.729, G.729 a/b
Fax Codec: G.711 pass-through, T.38
IP Assignment: Static IP, DHCP, PPPoE
Call Features: Call transfer (attended), Call forward (busy / no answer / unconditional), Call hold / retrieve, Call waiting, Caller ID display, Caller ID blocking, Anonymous call blocking, Hook flash
Security: HTTP 1.1 basic/digest, Authentication for Web setup, MD5 for SIP authentication (RFC2069 / RFC2617)
Voice Quality: VAD, CNG, AEC, AGC, Packet loss concealment, each line G.169 up to 128ms, Dynamic jitter buffer, Bell 202 and V.23 caller ID
Tone: DTMF, Ring Tone, Ring back tone (local and remote), Dial tone, Busy tone, MWI

SPE VoIP Adapter Comparison Chat

SPE Model Ethernet Ports FXS Port FXO Port PSTN pass-through Port USB-B Port
SPE-1.1 2RJ45 (LAN/WAN) 1 0 Yes Yes
SPE-1.1 Pro 2RJ45 (LAN/WAN) 1 1 Yes Yes
SPE-2.1 2RJ45 (LAN/WAN) 2 0 Yes Yes
SPE-2.1 Pro 2RJ45 (LAN/WAN) 2 1 Yes Yes
SPE-4.0 2RJ45 (LAN/WAN) 4 0 No Yes
SPE-4.2 Pro 2RJ45 (LAN/WAN) 4 2 Yes Yes
*FXO port allows local and remote PSTN-to-VoIP call origination and VoIP-to-PSTN call termination, automated call routing through PSTN, and power fail-over. PSTN Pass-through allows local PSTN line service for income/outbound call and failover.

Lynn
MSN: svoipsales@hotmail.com
Homepage: SpeedVoIP - VoIP Blocking, VPN, Encryption, SIP Adapter, ATA, Gateway
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On